The question of “how to shingle a hip roof” is often asked by those who want to enhance the strength of their roofing system at home. Shingling your roof is possible to be done on your own as it is rather simpler than installing the whole roof.
The shingle is the overlapping part on the roof’s side, and it has the function to keep the whole roof stronger and leak-free. The full information about it is over here.
Table of Contents
How to Shingle a Hip Roof
A hip roof is the kind of roof where all four sides of it are lowering toward the wall. This is the most common type of roof you will find in residential areas. For those who want to know how to shingle a hip roof, the answer is down below for you.
- Clear the Area
The first thing you need to do is to clear the area. Remove any water, debris, and dirt from the roof. The roof has to be clear because the shingles will be overlapping each other. If dirt or debris is stuck between the shingles, it would be tough to remove them later.
- Add Water Protection
The next thing to do on how to install hip shingles is to install the water protection. Install the ridges on the roof’s edge to make sure water won’t stick on the top of the roof.
- Install the Shingles
Now, install the shingles by start overlapping each other. Start from the bottom part of the roof and up to the steepest point of the roof.
How to Shingle a Hip Roof with Architectural Shingles
Architectural shingles are considered as the enhanced type of shingles used for enforcing better structure to the roof. It is made from a mix of asphalt and more fiberglass mat.
Surely, the goal of using this kind of shingle is to enhance the strength of the roof even better. Here is how to shingle a hip roof using architectural shingles.
- Add Protection
Protection here basically means the ridges. They are essential, considering that water just won’t be flowing down easily from the roof without them.
- Add the Shingles
After the ridges are installed, start adding the shingles. This is the base shingle, not yet the architectural one. It needs to be installed precisely at this point.
- Add the Architectural Shingles
Once the shingles are installed properly, start adding the architectural shingles. This is the step where the enhanced layer of shingles is given to the roof.
How to Shingle a Hip Roof Shed
The shed is always different from the main houses. The shed is usually a small, separated area located in the garden or backyard. The roof of the shed is also not that large and not too steep as well.
If your shed is using a hip roof, here is how to shingle a hip roof on that shed.
- Add Ridges and Shingles
The shed roof needs ridges, too. So, before installing the shingles, you need to protect the roof using ridges. Install them on the edges of each roof side.
- Caps and Glues
As the shed is more prone to weather risks, you need to make sure the shingles are not just nailed there. It has to be capped and glued as well to the roof. Do the step to enhance the strength of the shed roof.
Those who want to do the entire project on their own make sure that they know exactly the steps and the tools to use. However, if you have not done any projects on DIY roofing before, it is better to get help from someone else just as a precaution.
Anyway, the tips you need to read about how to shingle a hip roof are already up there and ready to help you out.